How Nails Works

  1. Apply base coat;

  2. Cure under nail dryer about 10/30/60s(Depending on base coat);

  3. Apply Nail Gel/Polish;

  4. Cure under nail dryer about 10/30/60s(Depending on Nail Gel/Polish);

  5. Apply Stamping Gel (recommended) or Nail Polish on your nail template;

  6. Use the Scraper to remove any extra nail stamping gel;

  7. Use the stamper to pick up the image;

  8. Print the image onto your nails in right position;

  9. Cure under nail dryer about 30/60/120s(Depending on Nail Dryer);

  10. Apply top base and cure under nail dryer about 10/30/60 seconds.

 

Notes:

  • Please wash the stamper before using. You may use scotch tape or a lint roller to remove nail polish left on the stamper. 

  • DO NOT clean the stamper with acetone, nail polish remover, or cotton. These materials will ruin the jelly like consistency of the stamper.

  • You may clean excess nail polish off your PLATES with acetone or nail polish remover.

  • Can be used with ANY nail polish

 

Tips:

✔ For Thin French Tip: Tap Your Nail Tip Gently And This Will Do

✔ For Thick French Tip: Tap Your Nail Tip Slightly Harder To The Stamper

✔ For Oblique French Tip: 45° Tap Your Nail Tip At Each Side To Get The Stroke